Bathroom styles

Traditional bathrooms

Traditional bathrooms bring classic shapes and warm detail into your home. We plan the look with you, then fit it with safe, modern pipes and wiring.

White marble-effect bathroom with a black bath panel and a black vanity
Bath with lit shelves set into white marble-effect walls, seen from the side

What does a traditional bathroom look like?

A traditional bathroom feels warm and settled. It borrows its shapes from Victorian and Edwardian homes.

Here are the parts you will see most often.

Bath with a black grid screen and dark marble-effect panels

Which colours and finishes work in a traditional bathroom?

Soft, warm colours suit this style best. Think cream, sage green, dusty blue or a deep heritage shade on the lower wall.

Taps and fittings

Chrome is the easy choice. Brushed brass or nickel looks richer, and it should be used on every tap and rail.

Tiles

Gloss metro tiles in a brick pattern fit almost any older house. Ceramic tiles suit walls well and cost less than stone.

Lighting and mirrors

Wall lights on each side of the mirror look right and cast soft light. A framed mirror finishes the look.

What should you check in an older home first?

Older houses hide things behind the walls. We look at these before we plan the room.

Floors and walls

Old floors can sag, and old walls can be uneven. We level and board them so the tiles sit flat. A roll-top bath is heavy, so we check the joists beneath it.

Old pipes

Lead or old iron pipes are best replaced while the room is open. New pipes mean better water flow and fewer leaks later.

Fresh air

Period rooms often have a small window and no fan. Damp can grow in those rooms. The Planning Portal explains when a new fan needs approval.

Old tiles and asbestos

Homes built before 2000 can contain asbestos in old floor tiles, textured coatings and pipe wrap. Do not drill, scrape or break anything you are unsure about.

Read the HSE guide to asbestos at home before any strip-out. Tell us at the home visit if you think it is there.

Bath with lit shelf niches set into white marble-effect walls

Can a traditional bathroom still work like a modern one?

Yes. The look is old, but everything behind it is new. We fit new waste pipes, safe wiring and a good fan.

Many people mix both styles. A roll-top bath can sit beside a walk-in shower with classic taps. For a plainer take, see our modern bathrooms page.

Our blog on bathroom renovations in older homes has more on what to expect.

How do we fit a traditional bathroom?

A typical full renovation takes around four days on site, as an estimate. Older homes can need more time if we find repairs.

1

Survey

We visit for free and check the floor, walls and pipes. We tell you what the room can take.

2

Design

You choose the bath, basin and tiles with us. We lay out the room on paper first.

3

Repair and plumb

We level the floor and replace old pipes. Then we board the walls.

4

Fit and finish

We tile, fit the suite and seal every joint. We test it all before we leave.

What does a traditional bathroom cost?

As a guide, full refurbishments start from £3,600 with PVC panels, for a bathroom up to 4 m². A freestanding bath, brass taps and wall panelling add to the price.

Repairs found on site can also add cost. We tell you before we do anything extra. The Which? cost guide helps you compare.

Your written price after the home visit is the real figure. Read about our bathroom refurbishments too.

Where can you see and plan the look?

These pages help you choose, and our showroom lets you see it in person.

Plan your traditional bathroom

Book a free home visit. We give you a written price and there is no obligation.

Questions about traditional bathrooms

Can I fit a roll-top bath in my bathroom?

Often, yes, if the room is big enough. The floor must carry the weight. We measure the room and check the joists first.

Yes. Classic taps and metro tiles look good in newer homes too. The style is about the details, not the age of the house.

It is a toilet with the cistern high on the wall. A chain or lever flushes it. Many people choose it for its Victorian look.

Yes. Traditional shower sets come in classic shapes. We check your water pressure to pick the right one.

Sometimes. If they are sound, we can work round them. Tell us at the home visit and we will check.

Often they do. Lead, iron or worn pipes are best changed while the room is open. We check them at the home visit.

A listed building needs consent for changes inside. Check with your council first. Getting consent is the property owner’s job.

Some work does, such as new waste pipes or new wiring. The Planning Portal explains when. Getting approval is the property owner’s job.

Start with air flow and a working fan. Then find the cause, such as a leak or poor sealing. We fix pipes and seals as part of the job.

Around four days on site, as an estimate. Repairs or layout changes make it longer. We give you dates in writing.

Not always. A freestanding bath and brass taps cost more, but metro tiles are cheap. As a guide, full refurbishments start from £3,600.

We fit bathrooms within 50 miles of our St Helens showroom. Call us on 01942 365 989 to check your postcode.

Free home visit

Tell us about your bathroom

Leave your details and we will call you back. We measure up at home and send a written price. There is no obligation.

Book a free home visit

Start with your postcode so we can check we cover your area.

We use your details only to arrange the visit and send the quotation. Privacy notice.